We have oil central heating which also heats the hot water.Why is oil level going down when not used? - thieves oil
We do not have oil for heating and hot water since August. Why the level slightly decreased) (a few centimeters to the meter, because if no oil was used? "The effect of time or for any other reason why he can imagine. I do not think that the oil has been stolen, you might think that the thieves more than that and the meter has been designed to be gradually reduced.
Sunday, December 20, 2009
Thieves Oil We Have Oil Central Heating Which Also Heats The Hot Water.Why Is Oil Level Going Down When Not Used?
Subscribe to:
Post Comments (Atom)
9 comments:
Now a few things come to mind. This is the underground tank? If so, it may be a leak in the bottom of the tank. If the tank is above ground and no obvious leaks, may be lost due to evaporation of the fuel. The indicator measures the amount of fuel, the volume of fuel expands and contracts with changes in temperature.
There was no hot food or hot showers or clothes since August? And not because you do not use hot water is not that hot, the oven does not hold for hot water is thrown during the operation. This is where the fuel is "in progress". All units to keep hot water at a certain temperature, so that when it asked by a person with the furnace, an advantage over him, and then you can water, the necessary heat.
The only solution is to turn the unit off completely and turn on the device when you heating and hot water. But be prepared to use a few hours for water to heat and keep warm, too.
Ways to use the amount of oil to reduce hot water to keep hot (isolate 1), hot water pipes with sockets. They keep the heat in hot water pipes and much more. Isolate the expansion tank, which has hot water. The furnace will run less, because the water is warm because the insulation is maintained.
There was no hot food or hot showers or clothes since August? And not because you do not use hot water is not that hot, the oven does not hold for hot water is thrown during the operation. This is where the fuel is "in progress". All units to keep hot water at a certain temperature, so that when it asked by a person with the furnace, an advantage over him, and then you can water, the necessary heat.
The only solution is to turn the unit off completely and turn on the device when you heating and hot water. But be prepared to use a few hours for water to heat and keep warm, too.
Ways to use the amount of oil to reduce hot water to keep hot (isolate 1), hot water pipes with sockets. They keep the heat in hot water pipes and much more. Isolate the expansion tank, which has hot water. The furnace will run less, because the water is warm because the insulation is maintained.
what proportion of the amount of oil that you in your system? could lead to a slight decrease in the amount of oil when the temperature changes. If you do not have a leak in the system. Pressure can also decrease or increase level. detect possible leaks or wory, their flight if they are effective temperature and pressure.
what proportion of the amount of oil that you in your system? could lead to a slight decrease in the amount of oil when the temperature changes. If you do not have a leak in the system. Pressure can also decrease or increase level. detect possible leaks or wory, their flight if they are effective temperature and pressure.
ditto for all the answers already posted, but the reasons for this type of oil has also evaporated.
Time, many, if it is to evaporate the release of this type of fuel.
ensure that everything is closed and sealed as necessary to stop evaporation.
ditto for all the answers already posted, but the reasons for this type of oil has also evaporated.
Time, many, if it is to evaporate the release of this type of fuel.
ensure that everything is closed and sealed as necessary to stop evaporation.
Have you checked the system checked for leaks? This oil is very thin, which could easily escape from a place. Like a leaky pipe threads on the track.
Is there a proper driver?
Post a Comment